HSR 型直接作用弹簧负载式减压型调压器为住宅、商业和工业应用中的天然气、生产气体或液化石油气提供气体控制。通过阀膜内部泄压,**限度地减小过压的可能。 如果任何出口压力高于非可调节泄压阀弹簧的泄压设,会使阀膜离开泄压阀阀座,从而释放过高的压力。广州奥丽斯特燃气设备有限公司咨询电话:零贰零-捌贰叁贰玖陆贰伍,壹叁柒壹零叁陆壹贰陆零/13710361260-陆熙。
HSR调压器功能特点:
角型阀体
直通阀体
高流通能力
紧凑型设计
高流量内部泄压
满足或超出 ANSI B109.4 / CGA 6.18 标准的要求
固定系数/PFM 精度
HSR调压器规格参数:
阀体尺寸和端部连接方式
角型阀体或直通阀体可提供 NPS 3/4 x 3/4、3/4 x 1、1 x 1、NPT 所有尺寸
允许的入口压力
紧急:150 psig / 10.3 bar
**工作压力:125 psig / 8.6 bar
允许的出口压力
紧急(外壳):25 psig / 1.7 bar
要避免内部零件损坏的**工作压力:3 psi / 0.21 bar 超出出口压力设置的差压
出口压力范围:4 in. w.c. 至 2.2 psig / 10 mbar 至 0.15 bar 之间的七个范围
温度适用范围:-20 至 160°F/-29 至 71℃
单位名称:广州奥丽斯特燃气设备有限公司
联系方式:陆熙020-82329625,13710361260
邮件地址:1318120303@qq.com
单位地址:广东省广州市天河区珠村东环路110号珠园大厦402室
Type HSR direct-operated, spring-loaded pressure reducing regulators provide control in residential, commercial, and in**l applications for natural, manufactured, or liquefied petroleum gases.Internal relief across the diaphragm helps minimize overpressure. Any outlet pressure over the start-to-discharge point of the nona**ble relief valve spring moves the diaphragm off the relief valve seat, allowing excess pressure to vent.
Features
Angle Bodies
Globe Bodies
High Capacity
Compact Design
High Capacity Internal Relief
Meets or Exceeds ANSI B109.4 / CGA 6.18 Requirements
Fixed Factor / PFM Accuracy
Specifications
Body Size and End Connection Styles:NPS 3/4 x 3/4, 3/4 x 1, 1 x 1, NPT All sizes available in Globe or Angle Body
Allowable Inlet Pressure
Emergency: 150 psig / 10,3 bar
Maximum Operating Pressure: 125 psig / 8,6 bar
Allowable Outlet Pressure
Emergency (Casing): 25 psig / 1,7 bar
Maximum Operating Pressure to Avoid Internal Parts Damage: 3 psi / 0,21 bar differential above outlet pressure setting
Outlet Pressure Ranges:4-inches w.c. to 2.2 psig / 10 mbar to 0,15 bar in 7 ranges
Pressure Registration:Internal
Temperature Capabilities:-20 to 160°F / -29 to 71°C
Unit name:Guangzhou honest Gas Equipment Co.,Ltd
Contact information:020-82329625,13710361260
Email:1318120303@qq.com
Unit address:Room 402,Zhuyuan building,110,East Ring Road,Zhucun,Tianhe District,Guangzhou,Guangdong Province,China
|