抛光树脂（电子厂半导体超纯水）原装进口
一.简要介绍：
（1）Tulsimer®MB-106 UP 是由核子级强酸型阳离子Tulsimer®T-46 及核子级强碱型阴离子Tulsimer®A-33 以1:2 体积比的剂量比例，预先混合的混床级离子交换树脂，专门提供给需要高纯水系统抛光用。
（2）Tulsimer®MB-106 UP 是专门用于超纯水的**段的抛光处理。
（3）Tulsimer®MB-106 UP 适合用于电子产业，生产半导体及映像管产业等需要超纯水的行业。具有高的交换容量及优越的物理特性。
二.产品特性：
核子级抛光树脂Tulsimer® MB-106 UP，产水18.2兆欧超纯水制备，性能对应罗门6040抛光树脂。主要优势是产水量大，行业内口碑较佳，具有超高性价比。
三.基本参数：
表1-1 Tulsimer® MB-106 UP 基本特性
|
型式 (Type) |
T-46 (阳) 强酸性阳离子交换树脂 (Strong acid Cation exchange resin) |
A-33 (阴) 强碱性阴离子交换脂 (Strong base Anion exchange resin) |
|
主体结构 (Matrix Structure) |
苯乙烯 (Cross linked polystyrene) |
苯乙烯 (Cross linked polystyrene) |
|
功能基 (Functional Group) |
硫酸基 (Sulfonic acid) |
季胺 (Quaternary ammonium Type I) |
|
物理性貭 (Physical Form) |
球状颗粒 (Moist spherical beads) |
球状颗粒 (Moist spherical beads) |
|
离子型式 (Ionic form supplied) |
氢 (Hydrogen) |
氢氧 (Hydroxide) |
|
粒径范围 (U.S.mesh in wet) |
16 to 50 |
16 to 50 |
|
粒度范围 (Particle Size) |
0.3 to 1.2 mm |
0.3 to 1.2 mm |
|
微粒含量 (Fines Content) |
穿过 US 50 Mesh 小于 0.5% (Less Than 0.5% passing through 50 U.S.mesh) |
穿过 US 50 Mesh 小于 0.5% (Less than 0.5% passing through 50 U.S.mesh) |
|
总交换容量 (Total Exch. Capacity) |
1.8 meq/ml minimum of 99% in hydrogen form |
1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
|
PH 范围 (pH Range) |
0 to 14 |
0 to 14 |
|
允许温度 (Temp. Stability) |
120°C |
60°C |
|
溶解率 (Solubility) |
Insoluble in all common solvents |
Insoluble in all common solvents |
|
溶出有机物 (Organic leachable) |
Less than 0.2 mg KMNO per ml of wet resin |
Less than 0.2 mg KMNO per ml of wet resin |
|
密度 (Backwash settled density)
|
Approx.750 gm/liter |
|
|
不纯物 (Impurities) |
Fe=50 ppm(max) Cu=50 ppm(max) Pb=50 ppm(max) |
Fe=50 ppm(max) Cu=50 ppm(max) Pb=50 ppm(max) |
|
球粒强度 (Bead strength) |
Avg. not less than 500g/bead by Chatillon test (ASTM Standard) |
Avg. not less than 300g/bead by Chatillon test (ASTM Standard) |
|